InfiniteCalcs

Trapezoid Calculator

A trapezoid calculator finds area and perimeter from the two parallel bases, perpendicular height, and leg lengths.

Trapezoid Calculator Tool

Enter your values in the calculator above, then use the explanations below to understand the result, check assumptions, and compare scenarios.

About this calculator

A trapezoid calculator finds area and perimeter from the two parallel bases, perpendicular height, and leg lengths. Trapezoids appear in geometry, roof and site layouts, fabrication, and architectural details where one pair of opposite sides is parallel but the other pair is not necessarily equal.

If the parallel bases are a and b and the perpendicular height is h, area is A = (a + b)h/2. Perimeter is the sum of all four sides. For an isosceles trapezoid, the two legs are equal, which can simplify perimeter and offset calculations.

Base A and Base B are the two parallel sides; either can be longer. Height is always measured perpendicular to the bases, not along a sloped leg. Area uses square units, while perimeter, bases, height, and legs use linear units.

Worked examples

Trapezoid with 10 ft and 6 ft bases

A trapezoid has parallel bases of 10 ft and 6 ft with a perpendicular height of 4 ft.

  1. Add the bases: 10 + 6 = 16 ft
  2. Multiply by height: 16 × 4 = 64
  3. Divide by 2: 64 / 2 = 32 ft²

Result: The trapezoid area is 32 ft².

Practical tips

  • Identify the two parallel sides before entering Base A and Base B.
  • Measure height perpendicular to the bases.
  • Enter both leg lengths when calculating a general trapezoid perimeter.
  • Keep all linear dimensions in the same unit.

Common mistakes

  • Using a sloped leg as the height.
  • Averaging the wrong pair of sides.
  • Forgetting one leg when calculating perimeter.
  • Reporting area in linear rather than square units.

Key terms

Base
One of the two parallel sides of a trapezoid.
Height
The perpendicular distance between the two parallel bases.
Leg
One of the two nonparallel sides of a trapezoid.
Isosceles trapezoid
A trapezoid whose two nonparallel legs have equal length.

Frequently asked questions

Which sides are Base A and Base B?
Base A and Base B are simply the two parallel sides of the trapezoid. Their order does not change the area result.
How do I calculate trapezoid area?
Add the two parallel base lengths, multiply by the perpendicular height, then divide the result by two.
Is the height the same as a trapezoid leg?
Usually not. Height is perpendicular to the bases, while a leg may be sloped unless the trapezoid has a right angle.
How do I find trapezoid perimeter?
Add all four side lengths: both parallel bases plus the two nonparallel legs.