Cube with 4-foot edges
A cube has an edge length of 4 ft.
- Volume = 4³ = 64 ft³
- Surface area = 6 × 4² = 96 ft²
- Space diagonal = 4√3 ≈ 6.93 ft
Result: The cube holds 64 ft³, has 96 ft² of total surface area, and a space diagonal of about 6.93 ft.
A cube calculator uses one edge length to determine volume, surface area, and space diagonal.
Enter your values in the calculator above, then use the explanations below to understand the result, check assumptions, and compare scenarios.
A cube calculator uses one edge length to determine volume, surface area, and space diagonal. Because every edge of a cube is equal and every face is a square, a single dimension defines the entire solid. This is useful for packaging, storage, fabrication, construction layout, and geometry problems involving equal-sided three-dimensional forms.
For edge length s, volume is V = s³, surface area is SA = 6s², and the corner-to-corner space diagonal is d = s√3. Volume changes with the cube of the side length, so doubling the edge makes the volume eight times as large.
Use cubic units for volume, square units for surface area, and linear units for edge length and diagonal. For real containers, distinguish between outside dimensions and usable inside dimensions before calculating capacity.
A cube has an edge length of 4 ft.
Result: The cube holds 64 ft³, has 96 ft² of total surface area, and a space diagonal of about 6.93 ft.