InfiniteCalcs

Tire Size Calculator

The tire size calculator compares tire dimensions such as overall diameter, sidewall height, circumference, and revolutions per mile.

Tire Size Calculator Tool

Enter your values in the calculator above, then use the explanations below to understand the result, check assumptions, and compare scenarios.

About this calculator

The tire size calculator compares tire dimensions such as overall diameter, sidewall height, circumference, and revolutions per mile. Tire sizing matters because changing width, aspect ratio, or wheel diameter can affect speedometer accuracy, gearing, ride comfort, clearance, handling, and fuel use. The calculator helps translate tire codes into physical dimensions so two sizes can be compared on the same basis.

A tire labeled 225/60R17 is approximately 225 millimeters wide, has a sidewall height equal to 60% of its width, and fits a 17-inch wheel. Overall tire diameter combines two sidewalls plus the wheel diameter. A larger overall diameter travels farther per revolution, while a smaller diameter travels less distance per revolution.

When comparing replacement sizes, focus on the percentage difference in overall diameter in addition to width and wheel fitment. A meaningful diameter change can alter indicated vehicle speed and odometer readings. Physical clearance, wheel width, load rating, speed rating, brake clearance, and manufacturer requirements must also be checked before installing a different size.

Worked examples

Decode a tire size

Interpret a 225/60R17 tire.

  1. Section width is 225 mm
  2. Sidewall height is 60% of 225 mm, or 135 mm
  3. Convert two sidewalls to inches and add the 17-inch wheel diameter

Result: The tire's overall diameter is approximately 27.6 inches.

Compare replacement diameter

A replacement tire is slightly larger in overall diameter than the original tire.

  1. Calculate both overall diameters
  2. Find the percentage difference between replacement and original
  3. Use that difference to understand the direction of speedometer change

Result: A larger replacement diameter generally makes actual road speed slightly higher than the speedometer would indicate if the vehicle is not recalibrated.

Practical tips

  • Compare overall diameter rather than wheel diameter alone.
  • Check physical clearance at full steering lock and through suspension travel.
  • Verify wheel width, load index, and speed rating before selecting a replacement tire.
  • Keep tire sizes appropriately matched across an axle and follow drivetrain requirements for AWD and 4WD vehicles.
  • Use the vehicle placard or manufacturer documentation as the baseline size specification.

Common mistakes

  • Assuming the first number in a tire code is the tread width in inches.
  • Treating the aspect ratio as a fixed sidewall measurement instead of a percentage of width.
  • Comparing only wheel diameter and ignoring total tire diameter.
  • Ignoring load rating, speed rating, or wheel-width compatibility.
  • Assuming a mathematically similar diameter guarantees adequate suspension or body clearance.

Key tire dimensions

DimensionWhat it representsWhy it matters
Section widthApproximate tire width in millimetersClearance and wheel compatibility
Aspect ratioSidewall height as a percent of widthRide, sidewall height, and overall diameter
Wheel diameterWheel size in inchesWheel fitment
Overall diameterTotal mounted tire diameterSpeedometer, gearing, and clearance

Key terms

Aspect ratio
Sidewall height expressed as a percentage of tire section width.
Overall diameter
Approximate diameter of the mounted tire from tread to tread through the center.
Circumference
Distance around the tire, which determines travel distance per revolution.
Revolutions per mile
Approximate number of tire rotations required to travel one mile.

Frequently asked questions

What does 225/60R17 mean?
It indicates an approximate 225 mm section width, a sidewall height equal to 60% of that width, radial construction, and a 17-inch wheel diameter.
Does changing tire size affect the speedometer?
Yes. Changing overall tire diameter changes distance traveled per wheel revolution, which can make actual speed differ from the indicated speed unless the vehicle compensates or is recalibrated.
Is the same wheel diameter enough to guarantee fit?
No. Width, aspect ratio, overall diameter, wheel width, offset, load capacity, brake clearance, and vehicle body or suspension clearance can all affect fitment.
Why does tire circumference matter?
Circumference determines how far the vehicle travels for each tire revolution and therefore influences revolutions per mile, gearing effects, speed indication, and odometer readings.